Department Of Aerospace Engineering | FACULTY OF ENGINEERING
» SERVICES » Services by Departments » Department of Aerospace Engineering

Department of Aerospace Engineering

(A) Service Analysis, Laboratory & Equipment Rentals

Department of Aerospace Engineering is equipped with ten (10) laboratory teaching, research and services that offer
a variety of analysis as follows;

List of full laboratory Equiment in our department are listed HERE

List of Equipment, Maintenance and Calibration in our department are listed HERE

Displayed Rates are quoted from  Minit JKTK 6/4(2019)

Payment Rates offered divided into 3 categories;

Category Description
A UPM's Student, Staff, Association, UPM's Faculties, Institution and Schools
B Government Agencies, Statutory Body
C Private sectors, Invidual, UPM's Subsidiaries, Union, Government's Business Body

 

No Name of equiment Rental/Service/Test Rates (RM)
Test Size/saiz sample size/Rental Category A Category B
Category C
1 Fire testing Per Sample 240 320 400
2 Optical microscopy with Image Analysis software Per Sample 220 290 360
3 Ultrasonic homogenizer for nanofillers dispersion Per Sample 170 220 280
4 Vacuum furnace Per Hour 230 310 390
5 Vacuum infusion Per Sample 250 330 410
6 Vacuum oven Per Hour 230 300 380
7 Water absorption test (Waterbath) Per Sample 240 320 400
8 Fatigue Testing Per Hour 190 250 310
9 Crop monitoring and maintenance using UAV Per Acre 640 850 1,060
10 Photo and video shooting for events using UAV Per Hour 80 110 140
11 Construction site monitoring using UAV Per Hour 80 110 140
12 3D Printer (Without Filament) Per Hour 180 240 300
13 Sewaan Makmal Komputer Per Hour 320 430 540
14 Open Loop Wind Tunnel, OLWT (Speed: 35 m/s , Test section size: 1m x1m x 2.5m) Per Hour 1,370 1,820 2,280
15 Closed Loop Wind Tunnel, CLWT (Speed: 50 m/s, Test section size: 1m x 1m x 3m) Per Hour 1,400 1,870 2,340
16 Open Jet Wind Tunnel, OJWT  (Speed: 7 m/s, Test section diameter: 2m) Per Hour 1,370 1,820 2,280
17 Six Component Balance System Per Hour 1,400 1,870 2,340
18 Hampden Wind Tunnel (Speed: 18 m/s, Test section size: 20cm x 20cm x 60m) Per Hour 700 930 1,160
19 Air Flow Bench With Smoke Visualization (Speed: 20 m/s, Test section size: 6.5cm x 24.5cm x 72.5m) Per Hour 700 930 1,160
20 Smoke Generator Machine (Fog Machine) Per Hour 700 930 1,160
21 Particle Image Velocimetry (PIV) System Per Hour 1,380 1,840 2,300
22 Digital High Speed Video Camera Per Sample 140 190 240
23 Single Stage Compressed Gas Gun Per Sample 140 190 240

 

APPLY FOR OUR QUOTATION!

HOW TO APPLY

  1. Download service application form  click HERE
  2. If applicant want to run the test his/her self, please fill read our department Safety handbook HERE and fill up the form HERE
  3. Please submit your completed form to;

Normalina Jamaluddin
Jabatan Kejuruteraan Aeroangkasa
Fakulti kejuruteraan
Universiti Putra Malaysia
43400 UPM Serdang
Selangor
Tel: 03-769 4680

Please pay HERE for our services

Forward the emailed receipt to no.j@upm.edu.my

(B ) MS ISO / IEC 17025 Accreditation Laboratory 

The Department also offers MS ISO/IEC 17025 accredited laboratory that will receive accreditation certificates under the
Laboratory Accreditation Scheme of Malaysia (SAMM) by the Department of Standards Malaysia.
 

Date of Certification Accreditation

 Analysis Services

Equipment

 Laboratory / Location

Responsible officer

* In the process of getting accreditation from SAMM

Field of Testing :

Mechanical

Material & Product Tested :

Metallic Materials in rectangular
Aluminium
Stainless Steel
Mild Steel

Type of Tests / Properties Measured :

Axial force controlled fatigue test/

Fatigue strength of metallic material in the fatigue regime

Test method, Specification / Equipment / Techniques Used :

Fatigue Test

Standard method (UPM/FK/ASL/TMD1), reference to: 
ASTM E466-07 (Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials)/

Material Test System (MTS)/

Force controlled with constant amplitude and periodic forcing function in air at room temperature

Material Test System (MTS)

Aerospace Structures Laboratory
Blok H, KAA006

Dr. Noorfaizal Yidris
Technical Manager

(Head of Laboratory)
*Nominated Signatory
+603-9769 4413
nyidris@upm.edu.my

To be appointed
Deputy Technical Manager   
+603-9769 4476


Mr. Ahmad Saifol Abu Samah

Competent Personel
+603-9769 6469

asaifol@upm.edu.my

Assoc. Prof. Ir. Dr. Faizal Mustapha
*Nominated Signatory

+603-9769 6404
faizalms@upm.edu.my

Assoc. Prof Dr. Rizal Zahari 
*Nominated Signatory

+603-9769 4426
rizal@upm.edu.my

Dr. Dayang Laila Abang Abdul Majid
*Nominated Signatory

+603-9769 6395
dlaila@upm.edu.my

* Please click on the link http://cems.upm.edu.my/ for more information regarding the services offered above.
Application Analysis Services and quotations for tests carried out can be obtained by writing an email to the Technical Manager.
Please attach emails berikut F3 form-C Application for Testing Services Form (ASL).

For further information regarding controlled documents under MS ISO / IEC 17025 please refer to the link http://iso.eng.upm.edu.my/

(C) Lecture Laboratory

Department of Aerospace Engineering is equipped with various teaching laboratories that provide space and equipment to ensure complete college internship process to run smoothly according to the teaching syllabus offered as follows;

Lecture Laboratory

Synopsis  

 Laboratory / Location

Responsible officer

Course Code
EAS 3921
Course Name
Aerospace Laboratory I Credit Hours
1 (0+1)

The course includes experiments regarding aerodynamics, Thermofluids and vibration.

Experiments were carried out is the aerodynamic characteristics of the body in incompressible flow and compressible flow, the observation and measurement of kinematic and dynamic properties of the fluid, thermodynamics analysis of aerospace and mechanical vibration equipment.

* Practical carried out in this laboratory involves only the aerodynamics, aerodynamics of the body in incompressible flow and compressible flow.

Aerodynamics Laboratory
Blok H, KAA001

Assoc. Prof. Dr. Azmin Shakrine Mohd Rafie
Head of laboratory

+603-9769 6400
shakrine@upm.edu.my

Mr. Saffairus Salih
Assistant Engineer

+603-9769 6469
saffairus@upm.edu.my

No practical courses in the current semester

* Practical course syllabus will be fully operational by 2016-2020

Aerospace Fabrication Laboratory
Blok H, KAA004

Dr. Mohamad Yazdi Harmin
Head of laboratory

+603-9769 4415
myazdi@upm.edu.my

Mr. Saifol Abu Samah 
Assistant Engineer

+603-9769 6469
asaifol@upm.edu.my

Course Code
EAS 3923
Course Name Aerospace Laboratory III Credit Hours
1 (0+1)

The course includes experiments concerning avionics, propulsion and measurement and sensing.

Experiments were carried out including aviation engines, and control satellite communication system.

* Practical carried out in this laboratory involves only the avionics.

Avionics laboratory
Blok H, KAA005

Dr. Md Amzari Md Zhahir 
Head of laboratory

+603-9769 4419
amzari@upm.edu.my

Mr. Mohd Azfar Roslan 
Assistant Engineer

+603-9769 6469
m_azfar@upm.edu.my

Course Code
EAS 3613
Course Name Aerospace Electrical and Electronics 
Credit Hours
3 (2+1)

The course covers the basic concepts of electrical and electronic circuits. Discussions on analog and digital communication systems are also covered.

Course Code
EAS 3922
Course Name
Aerospace Laboratory II 
Credit Hours
1 (0+1)

The course includes experiments concerning materials and aerospace structures.

Experiments were performed mechanical tests of materials and aerospace structures, and control of aerospace systems.

* Practical carried out in this laboratory involve only aerospace structures. Mechanical testing of aerospace structures.

Aerospace Structures Laboratory
Blok H, KAA006

Dr. Noorfaizal Yidris
Head of laboratory

+603-9769 4413
nyidris@upm.edu.my

Mr. Ahmad Saifol Abu Samah
Assistant Engineer

+603-9769 6469
asaifol@upm.edu.my

Course Code
EAS 3921
Course Name
Aerospace Laboratory I
Credit Hours
1 (0+1)

The course includes experiments regarding aerodynamics, Thermofluids and vibration.
 
Experiments were carried out is the aerodynamic characteristics of the body in incompressible flow and compressible flow, the observation and measurement of kinematic and dynamic properties of the fluid, thermodynamics analysis of aerospace and mechanical vibration equipment.

* Practical carried out in this laboratory involve only the vibration. Our experiments on mechanical vibrations.

Vibration and Control Laboratory
Blok H, KAA007

 

 

 

 

Aerospace Design Laboratory
Blok H2, H2.4





 

 

Aerospace Structures Laboratory
Blok H, KAA006

 

 

Vibration and Control Laboratory
Blok H, KAA007

Dr. Ermira Junita Abdullah
Head of laboratory

+603-9769 7917
ermira@upm.edu.my

Mr. Mohd Suhardi Ali 
Assistant Engineer

+603-9769 6469
m_suhardi@upm.edu.my

Dr. Fairuz Izzuddin Romli 
Head of laboratory

+603-9769 6399
fairuz_ir@upm.edu.my

Mr. Hermi Othman
Assistant Engineer

+603-9769 6469
hermi@upm.edu.my

Dr. Noorfaizal Yidris
Head of laboratory

+603-9769 4413
nyidris@upm.edu.my

Mr. Ahmad Saifol Abu Samah
Assistant Engineer

+603-9769 6469
asaifol@upm.edu.my

Dr. Ermira Junita Abdullah
Head of laboratory

+603-9769 7917
ermira@upm.edu.my

Mr. Mohd Suhardi Ali 
Assistant Engineer

+603-9769 6469
m_suhardi@upm.edu.my

Course Code
EAS 3922
Course Name
 Aerospace 
Laboratory II
C
redit Hours
1 (0+1)

The course includes experiments concerning materials and aerospace structures.
 
Experiments were performed mechanical tests of materials and aerospace structures, and control of aerospace systems.

* Practical carried out in this laboratory involves only the control of aerospace systems.

Course Code
EAS 3923
Course Name
Aerospace Laboratory III
Credit Hours
1 (0+1)

The course includes experiments concerning avionics, propulsion and measurement and sensing.

Experiments were carried out including aviation engines, and control satellite communication system.

* Practical conducted in laboratory experiments involved only control.

Course Code
EAS 3924
Course Name
Flights Laboratory for Agricultural Applications
Credit Hours
1 (0+1)

Courses include relevant experimental mechanics and flight stability and flight test aircraft.

Experiments were conducted focus to test the use of the aircraft on its flight characteristics.

Course Code
EAS 3713
Course Name
Aerospace Vehicle Design
Credit Hours
3 (1+2)

The course covers the principles of aircraft design process through case studies and design projects.

The emphasis on design of aircraft and spacecraft configuration, sizing, optimization and comparative study was provided. In addition, the introduction of the system design process space included.

Aerospace Design Laboratory
Blok H2, H2.4

Dr. Fairuz Izzuddin Romli 
Head of laboratory

+603-9769 6399
fairuz_ir@upm.edu.my

Mr. Hermi Othman
Assistant Engineer
+603-9769 6469 
hermi@upm.edu.my 

Course Code
EAS 3714
Course Name
Aerospace Design II
Credit Hours
3 (1+2)

The course covers the principles of aircraft design evaluation process through case studies and design projects.

In addition, sub-system design process leading aircraft, performance evaluation and cost estimates covered.

Course Code
EAS 3721
Course Name
Engineering Drawing
Credit Hours
2 (1+1)

The course covers the basic principles of engineering drawing by hand and computer aided design (CAD).

The techniques of engineering drawing, geometry, perspective drawing, modeling and painting installations for two and three dimensions are discussed.

Course Code
EAS 3922
Course Name
Aerospace Laboratory II
Credit Hours
1 (0+1)

The course includes experiments concerning materials and aerospace structures.

Experiments were performed mechanical tests of materials and aerospace structures, and control of aerospace systems.

* Practical carried out in this laboratory involve only the material and mechanical experiments on materials.

Composite Materials Technology Laboratory
Blok H2, H2.2 

Dr. Dayang Laila Abang Abdul Majid
Head of laboratory

+603-9769 6395
dlaila@upm.edu.my 

Mr. Mohd Suhardi Ali
Assistant Engineer

+603-9769 6469
m_suhardi@upm.edu.my

Course Code
EAS 3921
Course Name
Aerospace Laboratory I
Credit Hours
1 (0+1)

The course includes experiments regarding aerodynamics, Thermofluids and vibration.

Experiments were carried out is the aerodynamic characteristics of the body in incompressible flow and compressible flow, the observation and measurement of kinematic and dynamic properties of the fluid, thermodynamics analysis of aerospace and mechanical vibration equipment.

* Practical carried out in this laboratory involve only Thermofluids, thermodynamic analysis of aerospace equipment.

Propulsion Laboratory
Blok H2, H2.3

Assoc. Prof. Ir. Dr. Kamarul Arifin Ahmad
Head of laboratory

+603-9769 6405
aekamarul@upm.edu.my

Mr. Mohamad Nasir Johari
Assistant Engineer

+603-9769 6469 
mnasirj@upm.edu.my

Course Code
EAS 3923
Course Name Aerospace Laboratory III Credit Hours
1 (0+1)

The course includes experiments concerning avionics, propulsion and measurement and sensing.

Experiments were carried out including aviation engines, and control satellite communication system.

* Practical carried out in this laboratory involve only low engine.

Course Code
EAS 3923
Course Name Aerospace Laboratory III Credit Hours
1 (0+1)

The course includes experiments concerning avionics, propulsion and measurement and sensing.

Experiments were carried out including aviation engines, and control satellite communication system.

* Practical carried out in this laboratory involve only the satellite communication system.

Space Systems Laboratory
Blok H2, H2.1

Dr. Ahmad Salahuddin Mohd Harituddin
Head of laboratory

+603-9769 4412
a_salahuddin@upm.edu.my 

Mr. Hermi Othman
Assistant Engineer

+603-9769 6469
hermi@upm.edu.my

Course Code
EAS 3924
Course Name Flights Laboratory for Agricultural Applications
Credit Hours
1 (0+1)

Courses include relevant experimental mechanics and flight stability and flight test aircraft.

Experiments were conducted focus to test the use of the aircraft on its flight characteristics.

Flight Laboratory
TUDM Subang Airport 

Dr. Md Amzari Md Zhahir 
Head of laboratory

+603-9769 4419
amzari@upm.edu.my

Mr. Mohd Azfar Roslan 
Assistant Engineer

+603-9769 6469
m_azfar@upm.edu.my

List of practical lectures on the scheme School Year 2011-2015. Links Scheme of Studies Bachelor of Aerospace Engineering, UPM.
Any use of laboratories and laboratory equipment, please download the form below;

Laboratory Safety Manual
Laboratory Safety Handbook

Related forms
Laboratory Safety Form
Risk Assessment Form
Working Outside Office Hours Permit
Laboratory Application Form

Other link
Chemical Inventory System - Eng. Faculty (CIS)
Central Equipment Management System (CEMS)

(D) Research, Consultation and Expert Consultants

The Department also has six (6) research group comprising of experts and consultants experienced researchers.

Department Research Coordinator
Dr. Chia Chen Ciang  
+603-9769 4389

cc_chia@upm.edy.my

   Research Advisor
Assoc. Prof. Ir. Dr. Kamarul Arifin Ahmad
+603-9769 6405 

aekamarul@upm.edu.my

Research Group

Leader

 Researcher

Aerodynamics
Research Work Group

Dr. Mohammad Zuber*
+603-9769 4410 

mzuber@upm.edu.my

Assoc. Prof. Ir. Dr. Kamarul Arifin Ahmad
Assoc. Prof. Dr. Azmin Shakrine Mohd Rafie
Assoc. Prof. Dr.-Ing. Surjatin Wiriadidjaja*

 Propulsion and Termofluids
Research Work Group

Assoc. Prof. Ir. Dr. 
Abd. Rahim Abu Talib
+603-9769 6392 

abdrahim@upm.edu.my 

Dr. Syamimi Saadon

Avionics System and Technology 
Research Work Group

 Dr. Md Amzari Md Zhahir
+603-9769 4419 

amzari@upm.edu.my

 

Aerospace Materials and Structures
Research Work Group

 Assoc. Prof. Dr. Rizal Zahari 
+603-9769 4426 

rizal@upm.edu.my

Assoc. Prof. Ir. Dr. Faizal Mustapha
Dr. Dayang Laila Abang Abdul Majid
Dr. Noorfaizal Yidris
Ir. Dr. Mohamed Thariq Hameed Sultan
Dr. Mohamad Ridzwan Ishak
Dr. Norkhairunnisa Mazlan
Dr. Mohammad Yazdi Harmin
Dr. Chia Chen Ciang

Aerospace Vehicle Guidance and Control
Research Work Group 

 Prof. Dr.-Ing. Ir. Renuganth Varatharajoo
+603-9769 6406 

renu@upm.edu.my

Dr. Ermira Junita Abdullah
Dr. Md Amzari Md Zhahir
Dr. Syaril Azrad Ali
Dr. Ahmad Salahuddin Mohd Harithuddin

Aerospace Design and Applications
Research Work Group

Dr. Fairuz Izzuddin Romli
+603-9769 6399

fairuz_ir@upm.edu.my

Dr. Mohammad Yazdi Harmin

Full details can be obtained in the Areas of Expertise Department or Website Research Department http://aero.upm.edu.my/

In addition, the researchers department is also actively involved in the following research center Aerospace Manufacturing Research Centre (AMRC) .The full list of activities and research can be found at the link.

(E) Conferences, Workshops, Training Courses

AEROTECH Conference
 
AEROTECH conference is a platform for academics, government agencies and industry to share experiences and current activities in aerospace technology, develop a professional network, and also offers cooperation for the advancement of technology. This conference has now entered its fifth edition since its inception in 2005, which was organized by the Aerospace Department, Universiti Putra Malaysia, Malaysia. Official site Conference is http://www.aerotech.eng.upm.edu.my/



For further information please contact

Head
Department of Aerospace Engineering

Faculty of Engineering
Universiti Putra Malaysia

43400 Serdang Selangor
+603-9769 6400 

+603-8656 7125 
eng.kaa@upm.edu.my 

 

 

Updated:: 24/08/2020 [no.j]

MEDIA SHARING

FACULTY OF ENGINEERING
Universiti Putra Malaysia
43400 UPM Serdang
Selangor Darul Ehsan
0397696262
0397694488
C1601507986